A door that's jumped its track can jam mid-cycle or hang at a dangerous angle. We realign or replace the damaged track section and check what knocked it loose in the first place.
Fixing the symptom without finding the cause usually means the same problem returns within weeks.
We don't eyeball alignment. Plumb and level get checked and confirmed before the job is done.
A bent section weakens over time even after straightening, so replacement is usually the more durable fix.
Vehicle impacts often bend both the track and the bracket mounting it to the frame. We check both.
Each service below is handled by a technician trained specifically for this kind of repair, not a generalist guessing at it.
Track sections are checked for plumb and level, then adjusted and secured to the frame at the correct tolerance.
Visibly bent or dented track sections get swapped for new standard sections rather than bent back into shape.
A roller jumping the track repeatedly usually means the rollers themselves need replacing along with the fix.
From a vehicle backing into the door to storm debris impact, we assess and repair track, brackets, and any related panel damage.
A track can only stay aligned if the brackets holding it are solid. We check and correct this on every off-track call.
Let us know if the door is jammed off-track or just running rough, and we'll prioritize accordingly.
Technicians carry standard track sections and mounting hardware for common configurations.
We check the track, rollers, and brackets together to find the root cause before quoting the fix.
The door is confirmed running smoothly on the corrected track before the job is closed out.
“Backed the truck into the door and bent the track pretty badly. Replaced the section and it runs like new.”
“Track was off plumb by more than it looked. Fixed properly instead of a quick patch.”
“Appreciated that they checked the wall brackets too, not just the visible bent section.”
Usually a worn roller, a bent track section, a loose bracket, or an impact from a vehicle or debris.
We don't recommend it. Forcing a door back on the track can cause further damage or personal injury.
Minor bends can sometimes be straightened, but visibly dented or kinked sections are usually replaced for a more durable fix.
A straightforward realignment costs less than a section replacement, and we'll confirm which applies before starting.
No, we recommend not operating the door until it's repaired, since further damage or injury risk increases with continued use.
Simple cases resolve quickly; more extensive impact damage may need additional time for full repair.
Same-day dispatch, upfront pricing, and a written warranty on every visit.
☎ Call +1-831-293-1591From one side of Lakewood to the other, dispatch is built to reach you quickly.
Embedded Map Placeholder for Lakewood, SC